1. UNS R50400 (Ti Grade 2)
Generic Name & Other Designation
Ti Grade 2, Commercially Pure Ti Grade 2 (CP Ti Grade 2), W.Nr. 3.7035, Ti-Grade 2
Product Overview
UNS R50400 (Titanium Grade 2) is the workhorse of the commercially pure titanium family. Striking a perfect balance between moderate yield strength and high ductility, UNS R50400 exhibits exceptional corrosion resistance in oxidizing media, chloride solutions, and marine environments.
Its low density 4.51g/cm3 allows engineers to drastically reduce system weight while improving component longevity in power plants, seawater desalination facilities, and chemical reactors.
Key Highlights
✅ Optimal Strength-to-Weight Ratio: Provides high structural integrity with half the density of stainless steel.
✅ Passivation Layer Protection: Forms an immediate protective TiO2 oxide layer preventing saltwater attack.
✅ Superior Cold Formability: Highly ductile matrix enables complex deep drawing and cold bending.
✅ Biocompatible & Non-Magnetic: Completely safe for medical implants and sensitive instrument enclosures.
Chemical Composition & Physical Properties
1. Chemical Composition (wt%)
Element | Ti | Fe | C | N | O | H |
Min (%) | Bal. | — | — | — | — | — |
Max (%) | Bal. | 0.30 | 0.08 | 0.03 | 0.25 | 0.015 |
(Note: Composition strictly conforms to ASTM B265/B348 specifications for CP Grade 2 Titanium.)
2. Physical & Mechanical Properties
Parameter | Value / Standard (Annealed State) |
Density | 4.51 g/cm³ (0.163 lb/in³) |
Melting Point | 1665°C (3029°F) |
Tensile Strength (Rm) | ≥ 345 MPa (50 ksi) |
Yield Strength (0.2%, Rp0.2) | 275 – 450 MPa (40 – 65 ksi) |
Elongation (A5) | ≥ 20% |
Modulus of Elasticity | 105 GPa (15.2 × 10⁶ psi) |
Available Forms
Tubing & Pipe: Seamless heat exchanger tubing, condenser pipes, hydraulic lines.
Plates & Sheets: Cold-rolled sheets, heavy mill plates, foil strips.
Bar & Wire: Centerless ground round bars, welding wire, tie rods.
Fittings & Flanges: Weld elbows, stub ends, blind flanges, fasteners.
Typical Application Scenarios
Desalination & Marine: Seawater evaporators, reverse osmosis pumps, hull fittings.
Power Generation: Steam turbine condenser tubes, auxiliary cooling circuits.
Chemical Processing: Chlor-alkali cell anodes, organic acid reaction tanks.
Quality Assurance & Testing
100% Pneumatic/Hydrostatic pressure testing and pneumatic leak testing.
Microstructural phase inspection and tensile testing per ASTM E8.
Complete compliance certification provided under EN 10204 3.1.
Supplier Information (BELNADE)
Supplied by BELNADE, a global stockist of commercial pure titanium mill products. BELNADE delivers precision shearing, custom tube bending, and expedited global air freight.
Get in Touch with BELNADE for Quotes and Technical Inquiries
📧 Email: info@belnade-material.com
🌐 Website: www.belnade-material.com
💬 Mobile/ WhatsApp: +86 158-0040-6687